THE NEMO MODEL # V1 SUBMERSIBLE WELL PUMP measures 8.5" high X
3.5" in diameter, and weighs 4.5 lbs.
NEMO V1 case features the following industrial quality components:
CASE: Heavy guage impact extruded 3 1/2" O.D. aluminum case fits 4" or larger wells.
MAIN GASKET: EPDM seamless rubber.
WIRE LEADS: 8" color-coded 12 AWG vinyl insulated stranded copper.
WIRE SEALS: EPDM rubber plugs integrally installed to above wire leads.
INTAKE FILTER: 20 mesh spring loaded stainless steel.
DISCHARGE FITTING: Barbed insert to fit 3/4" flexible pipe or tube.
FLOJET pumps used in Nemo Submersibles feature industrial grade head/motor
units with the following specifications:
current draw permanent magnet, ball bearing drive, 2,000 hour brush life.
PUMP HEAD: Positive displacement, duplex diaphragm design tolerates passage of small foreign particles
and can be run dry without damage.
Disassembly provides user access to rebuildable head and replaceable motor brushes.
PERFORMANCE: Typically 1 to 2 GPM depending on lift height (head) and operating voltage. Maximum
head is rated at 230 feet.
POWER DRAW: Typically
50 watts - 100 watts depending on depth of lift.