NEMO SOLAR DC SUBMERSIBLE WELL PUMPS ______________________________________________

OTHER SYSTEM COMPONENTS

HOME
NEMO PUMP SPECIFICATIONS
NEMO PUMP FLOW CHART
NEMO PUMP INSTALLATION
NEMO PUMP SYSTEMS GUIDE
NEMO USE GUIDE
NEMO PUMP WARRANTY
HOW TO ORDER
NEMO QUESTIONS?
NEMO SOLAR CHARGE CONTROL
FLEXCHARGE TIMER
RELAY & SOCKET
POWER-TECH AGM BATTERY
LUSES LED LAMP
FLOJET QUAD PUMP
ON SALE SPECIALS
RELATED LINKS
ABOUT NEMO COMPANY
Besides Nemo Submersible Well Pumps, we stock a Flojet 4300 non-submersible pump and a limited selection of solar electric system components. Items described below normally ship within 24 hours and can be ordered via the Shopping Cart on the How To Order page.

COMPONENTS - DESCRIPTIONS
Flojet4300.jpg

THE FLOJET 4300 12VDC QUAD PUMP
In many installations a Nemo Submersible will work better and last longer if it pumps water into a non-pressurized storage tank and not directly into a pressure tank. To obtain standard household water system pressure, a booster pump can be installed between a non-pressurized storage tank and a standard pressure tank.
This Flojet Booster Pump can automatically provide a maximum 45 psi water pressure to a pressure tank, with a flow rate of up to 4.9 gallons per minute. This continuous duty fan-cooled model, is an industrial series 12 Volt DC quad demand pump with a built in pressure switch. It is rated at 10 amps, but at 4.9 GPM that still translates into outstanding efficiency. It comes complete with snap-in 3/4" hose barbs for easy installation.

CCLVD.jpg
NEW! NEMO SOLAR CHARGE CONTROL & LOW VOLTAGE DISCONNECT.
The NS Model 12/24 - 15A is a 15 ampere solar charge control (CC) and Low Voltage Disconnect (LVD) switch which can handle 15 amps of solar current, battery current, and load current. The solar module, battery, and load circuits are individually protected with 3 designated 15 amp ATC (blade) type fuses. This CC/LVD unit can be used in both 12 volt and 24 volt systems (It automatically changes to 24 volt if the battery voltage is higher than 17 volts).
When used with a Nemo Submersible Pump, the LVD circuit will automatically disconnect and reconnect the pump relative to available voltage level and thus protect the pump from excessively low voltage conditions that might drag, stall, and overheat the pump motor.
FCtimer.jpg
FLEXCHARGE PROGRAMABLE TIMER
This timer is a 12 hr, 8 event, clock based programmable 8A load controller. Multiple Load ON and OFF times are programmed into this real time clock controller. Each day can be programmed with its own unique timing pattern. Eight ON and eight OFF events can be programmed independently. Example; Use one ON event to have a pump,light, or other load come on at 7pm every day then use seven different OFF events to turn the load OFF at a different time each day.
Features:
* Internal battery maintains clock and programmed memory for up to 3 months with no external power.
* Consumes less than 3mA in standby mode.
* Drives up to 8A Inductive Loads or 16A Resistive Loads.
* Isolated relay contacts allow user to directly control 115Vac Loads
* Reverse Polarity Protected.
* Manual override allows the user to manually turn the load ON and OFF as desired.
* Easy to Use Terminal Block for simple installation.
LusesLED1.Jpeg
NEW! LUSES LED LAMP: The outstanding features and quality construction of this LUSES brand 16 LED high efficiency lamp has made it our choice for the only lamp we stock. Designed for use in 12VDC solar energy systems, it is easily adaptable to either single or ganged lighting applications throughout the home and garden, as well as in marine and automotive installations. And unlike most LED lamps, each of the 16 super bright white LEDs in the LUSES lamp have a 120 degree spreading angle, which provides a very even, dead-spot free lighting effect. The operating voltage range is 10 to 15 VDC, the maximum energy consumption is less than 0.17 amps, and the estimated life is 80,000 hours. So even a small 10 watt solar module will typically power 2-4 lamps for 4-5 hours per day.....for decades! The rugged all aluminum white epoxy coated case measures about 3" long (including the mounting flange) X 2" wide X 1/2" deep. All these features, coupled with the low cost, makes this lamp our top favorite for a wide range of remote site lighting applications.
AGMBattery.jpg
THE POWER-TECH AGM DEEP CYCLE SEALED BATTERY
Power-Tech Batteries are specially designed for long, deep discharges in virtually any environment, including RE, RV, and Marine applications. The Absorbed Glass Mat (AGM) design provides 100% maintenance-free service and insures spill-proof/leak-proof operation. *Power-Tech AGM batteries offer premium power, quality and performance. *Maintenance free. *Long, deep discharges. *Sealed/Submersible.
We offer the Group 31 size 12 Volt POWER-TECH. It measures 12.94" Long X 6.75" Wide X 9.38" High. The Amp Hour rating is 105 and at 69 pounds it ships UPS. $237. Free Shipping only within 48 US.
SpliceKit.jpg

SPLICE KIT: Contains 2 crimp connectors for 12/10 gauge wire and 2 sealant lined heat shrink tubes. A Free splice kit is included with each Nemo Pump.

Fuse-Holder.jpg
ATC FUSE HOLDER with 10 guage wire leads and a 20 amp fuse. PRICE: $7. Postpaid.
RelayWsocket.jpg
12V SPDT 30 AMP RELAY w/Socket: 12 Vdc, 88 ohm coil. N.O. contacts rated 30 amps. N.C. contacts rated 20 amps. $10. Postpaid.
Print

============================================================================================