 THE FLOJET 4300 QUAD PUMP
This is an excellent pump for delivering water from water sources that do not require a submersible pump. Rivers, ponds,
springs, and even wells with large diameter casings, this pump can be installed on the surface or suspended above water level.
And if equipped with a foot valve, it will pull water up from below the pump a good 20 feet and lift it to nearly 100 feet.
Also, in many installations a Nemo Submersible will work better and last longer if it pumps water into a non-pressurized
storage tank and not directly into a pressure tank. To obtain standard household water system pressure, this pump can be installed
between a non-pressurized storage tank and a standard pressure tank (see diagram on Systems Guide page).
This Flojet 4300 Pump can automatically provide a maximum 45 psi water pressure to a pressure tank, with a flow rate of
up to 4.9 gallons per minute. This continuous duty fan-cooled model, is an industrial series 12 Volt DC quad demand pump with
a built in pressure switch. It is rated at 10 amps, but at 4.9 GPM that still translates into outstanding efficiency. It comes
complete with snap-in 3/4" hose barbs for easy installation.
|
$145 POSTPAID TO USA.
|
$160 POSTPAID TO CANADA & MEXICO.
|
$175 POSTPAID TO ALL OTHER COUNTRIES WORLDWIDE.
|
|
